|
|
|
Not Just Any Sauna - Important DistinctionsMost FIR saunas are built with lots of adhesives as it makes construction faster and easier than building without them, and it allows use of thinner, less expensive wall paneling. They are built like cheaper cabinets - thin wood is glued-on, and it’s often backed by plywood. They are manufactured for rapid production, economy, and appearance - not for the “purity” found in our medical-quality detox saunas. It is more costly to build saunas in the ultra-safe manner we do, so numerous other companies try to create impressions that their saunas are built like ours. They may use the same or a similar low-resin wood for the visible paneling and describe their saunas as made of non-toxic wood or as hypoallergenic. The unsuspecting may assume that these saunas are also made for people who are chemically ill or have allergies - but the truth is often a different matter. Wood selection is a necessary and easy first step in creating safer saunas. Describing saunas by the wood used can conceal but cannot correct toxic construction choices. False impressions are reinforced when the other construction components are not openly revealed. For instance, it may not be stated that a lower-grade of wood or an entirely different species is used for the framing; if plywood is hidden; that the paneling is nailed to a glue-coated frame; or if the exterior is coated or varnished. Such omissions are commonplace. FIR sellers downplay the glue factor by claiming to use small amounts of water-based glue. Some carpenter’s glues are labeled “non-toxic”, but they are not chemical-free. Most are water-emulsified plastic with chemical additives (biocides, preservatives, thinners, etc.).
A sauna is unlike any other wooden product in your home - you get it hot and you then get into it! That is not the same as standing next to a chair, at normal room temperatures, that contains some glue at the joints! While detoxifying, the last thing you want to do is sweat out one toxin and inhale fumes of another! Heavenly Heat’s use of non-corrosive steel screws and thicker paneling assures that each sauna has both the clean air that is essential for effective detox, as well as the strength needed to last for decades.
|
|
Copyright 2003-2008 Bob Morgan Internet Mosaic Traffic Tools
|